GFRC Equipment Sales

GFRC Construction has the best GFRC Equipment in the industry.

GFRC Construction supplies the Glass Fiber Reinforced Concrete Industry with the very best equipment including mixers, sprayers / pumps, and accessories. Our High Shear (HS) mixers are madeGFRC Equipment Floor Mount for high production. We cut no corners making this equipment and it shows. Under the most demanding conditions our mixers stand the test of time. Our sprayer / pumps range from 1.5 hp to 5 hp on a three wheel cart, four wheel cart, boom cart, floor mount, trailer mount, truck mount, and more. We have a full line of accessories from spray guns to bucket carts as well. We have many custom orders that we will tailor make equipment to your specific needs which is also one of our specialties. If you are preparing to set up a GFRC ProductionGFRC Spray / Pump Facility then you should give us a call. We will  put our 32 years of GFRC Equipment know how to work for you.

Call:

Office: 1-586-382-4646

Visit The GFRC Construction Equipment Website

GFRC Equipment List and Description

PMP-103/ 203 ™ Three wheel cart pump:

The 103 GFRC Sprayer and the 203 GFRC Sprayer, are  very versatile pumps and one our biggest sellers, they use the same pump as our boom pumps but it is mounted on a three wheel cart w/16” tires for high mobility in and out of the shop and it is a great space saver as well. It comes with premix gun, 20ft. of transfer hose, variable speed reversing drive and is plug and play ready. This pump is also a great for transferring material from your mixer to satellite pumps or stations.  Power: 115vac/20amp   Air: 11cfm @ 80psi

Multiple material application system, with lot’s of available options.
GFRC, GRC, GFRG, PVRC, PVA, Fire Proofing, Stucco, Grouting

 

PMP-103-F/ 203 ™ Three wheel cart pump:

The GFRC Sprayer 103-F ™ and the GFRC Sprayer 203-F are very versatile pumps, they use the same pump as our boom pumps but it is mounted on a three wheel cart w/16” tires for high mobility in and out of the shop and it is a great space saver as well. It comes with premix gun, 20ft. of transfer hose, variable speed reversing drive and is plug and play ready. This F Model also has a water flush out to keep your spray guns clean and a raised control panel for ergonomic in shop style operation. Power: 115vac/ 20amp Air: 11cfm @ 80psi.

Multiple material application system, with lot’s of available options.
GFRC, GRC, GFRG, PVRC, PVA, Fire Proofing, Stucco, Grouting

 

PMP-103-F-I / 203 ™ Three wheel cart pump Gypsum or GFRC:

This is a multi-task pump, it uses the same pump as our boom pumps but it is mounted on a three wheel cart w/16” tires for high mobility in and out of the shop it can be configured to run straight gypsum or be configured to run GFRC & Gypsum. It comes with premix gun, 20ft. of transfer hose, variable speed reversing drive and is plug and play ready. This F-I Model also has a water flush out to keep your spray guns clean and a raised control panel for ergonomic in shop style operation, it also has a metered adjustable accelerator injection system for shooting gypsum. Power: 115vac/ 20amp Air: 11cfm @ 80psi

Multiple material application system, with lot’s of available options.
GFRC, GRC, GFRG, PVRC, PVA, Fire Proofing, Stucco, Grouting

PMP-100-LF/ 200 ™ Three wheel cart pump with hopper dump:

The PMP-100-LF ™ still has the high mobility of the 103 style pump but it’s mounted on a 4 wheel framework that has an attached air assisted hopper dump which is very similar to our larger boom style pumps. It has 4 terra tires for high mobility whether in the shop or out on the job site. It comes with premix spray gun, 20ft. of transfer hose, variable speed reversing drive, water flush out and is plug and play ready. This pump is also a great for transferring material from your mixer to satellite pumps or stations.  Power: 115vac/ 20amp Air: 11cfm @ 80psi

Multiple material application system, with lot’s of available options.
GFRC, GRC, GFRG, PVRC, PVA, Fire Proofing, Stucco, Grouting

 

PMP-104 ™ / Premix Spray station: (Designed for Premix Spraying)

W/ 20ft. double articulating neutral gravity boom that can reach 40ft. in circumference, air assisted hopper dump, 40 ft. transfer hose, premix gun, balanced four-wheel cart and water flush out for gun. It also has a variable speed reversible drive. Power: 115vac/ 20amp Air: 11cfm @ 80psi

Multiple material application system, with lot’s of available options.
GFRC, GRC, GFRG, PVRC, PVA, Fire Proofing, Stucco, Grouting

 

PMP-105 ™ / Full Spray Station:

This pump has all the great features of the PMP-104 w/added additions for spraying GFRC, PVRC & GFRG in either a Premix or Concentric manner. It has a full air tree with an extra port for air tools, two spool material rack with steel or optional ceramic material guides. (Concentric Gun optional addition) Power: 115vac/ 20amp Air: 24-27cfm @ 80psi

Multiple material application system, with lot’s of available options.
GFRC, GRC, GFRG, PVRC, PVA, Fire Proofing, Stucco, Grouting

 

HIGH SHEAR MIXERS

 

MXVRR-1A MIDI/ aka (MX Midi) Contact us on pricing, as it varies on some models

Mid-sized High Shear mixer: This mixer is in-between the MXVRR-1 & MXVRR-2 sizes and is designed to be adaptable to many mixing needs. This mixer can be configured to mix 5 to 30 gallon pails. It has all the same features of the MX1 on the drive system but it has a larger 1-1/2” 4140 chrome-moly hardened mix shaft that extends to the bottom of the mixers main frame with a 26” lift on a 3” air lift system. Its power requirements vary on motor size.

 

(We no longer sell the MIDI in a 1hp model unless requested)

MXVRR-2/ aka (MX2) High Shear Mixer

The MX2 is the leader in its size class for High Shear high production mixing. It can mix up 240lb. batches every 3 minutes and up to 400lb batches in as little a 4 minutes. It is mounted on a very stable steel plate base. The mixer is mounted using our four point stance design; two mechanical tube guides and two 3-1/2” high flow air rams; this keeps the mixer moving up and down with a very stable and smooth motion. It is a 10 hp variable speed frequency drive that allows you to operate from 0 to 920 rpm. The 5 groove power band is designed to last up to 20 years. The mix blade is a prop style through hardened 4140 mounted on a 2” 4140 Chromed Chrome-Molly shaft. It comes with one mix bucket and cage.

 

MXVRR-3 / aka (MX3) High Shear Mixer

The MX3 is a monster of a mixer and the leader in its size class for High Shear high production mixing. It can mix up 800lb. batches every 4 minutes. It is mounted on a very stable steel plate base. The mixer is mounted using our four point stance design; two mechanical tube guides and two 3-1/2” high flow air rams; this keeps the mixer moving up and down with a very stable and smooth motion. It is a 10 hp variable speed frequency drive that allows you to operate from 0 to 920 rpm. The 5 groove power band is designed to last up to 20 years. The mix blade is a prop style through hardened 4140 mounted on a 2” 4140 Chromed Chrome-Molly shaft. It comes with one mix bucket and cage.

Note: Mixers can be mounted on wheels and tow behinds for on-site applications

 

Basic Accessories:

 

BKRT-30/ Bucket cart:

This has been a real back saver for allot of our customers. It will easily pick up your bucket from the mixer and when you tip it back, it locks it vertically into place on four wheels and holds the bucket, which makes it easy to roll around the shop and field to your pumps location. The two main wheels are flat free urethane filled pneumatics.

 

TDV-100/ Time Delay Vibration for 100 series pumps:

This a very handy unit, for keeping your mixes in motion down the hopper shoots. This vibrator is designed “Not” to segregate Premix designs, by using a time delayed system that allows you to set run & stop period time. A real must have for shops that want to free up a laborer for jobs other then just standing by the pump.

SCRN-100/ 100 Series Pump Hopper Screen:

This screen is a hardy built woven pattern steel that is set in a square frame with sides on top to keep material headed into the hopper and sides on the bottom to keep it securely attached to the hopper. We offer it with & without a vibrator.

 

INJECT-1:

Single line Metered injection system for the addition of additives at your gun nozzle or anywhere along the pump line. We also have multi injectors as well, in case you have a need for multiple additives.

PRMXG/ Straight tube Premix gun:

This is our patented easy to use premix gun. It is adaptable and compatible to the PRMXG-90 so you can switch between the two without having to remove the gun body fro its air and water lines.

PRMXG-90/ 90 deg. Premix gun:

PRMXG-45/ 45 deg. Premix gun:

Using the same technology used in our patented premix gun, we changed the tube to a 2.25” radius allowing for more versatility in your spraying needs.

 

PRMXS-1/ Face Coat Gun / Mist Coat Gun:

Designed to give you fine mist swirl pattern, to help lay down smooth and precise detail in your Architectural molds.

 

 

 

PRCNG-1/ Concentric Spray Gun:

The Industry standard for 25 years, this concentric gun has remained the leader. It has a quick access top with latches so you don’t have to mess with screws that can clog with concrete overspray.

 

BSCALE/ 1000lb Floating Weight Beam Style Floor Scale:

A cost effective basic beam style scale that is used by both start up and founded companies.

 

BSCALE-D/ 1000lb Floor Style Digital Scale:

One of the most popular heavy duty scales out there. This is a heavy duty floor scale that is mounted on four wheels. It has a digital read out and can be connected to computers to track weights. This scale is similar in design to the beam style scales, only it has a digital readout.